Pg 1.9
Perl
module
-
Part of CPAN
distribution
pgsql_perl5 1.9.0.
Pg - Perl5 extension for PostgreSQL
use Pg;
$conn = Pg::connectdb("dbname=template1");
$res = $conn->exec("SELECT * from pg_user");
while (@row = $res->fetchrow) {
print = join(" ", @row);
}
The Pg module permits you to access all functions of the
Libpq interface of PostgreSQL. Libpq is the programmer's
interface to PostgreSQL. For examples of how to
use this module, look at the file test.pl.
This perl interface uses blessed references as objects.
After creating a new connection or result object,
the relevant Libpq functions serve as virtual methods.
You do not have to care about freeing the connection-
and result-structures. Perl calls the destructor whenever
the last reference to an object goes away.
The method fetchrow can be used to fetch the next row from
the server: while (@row = $result->fetchrow).
Columns which have NULL as value will be set to undef.
Pg.pm contains one convenience function: doQuery. It fills a
two-dimensional array with the result of your query. Usage:
Pg::doQuery($conn, "select attr1, attr2 from tbl", \@ary);
for $i ( 0 .. $#ary ) {
for $j ( 0 .. $#{$ary[$i]} ) {
print "$ary[$i][$j]\t";
}
print "\n";
}
Notice the inner loop !
The functions have been divided into three sections:
Connection, Result, Large Objects. For details please
read libpq.
With these functions you can establish and close a connection to a
database. In Libpq a connection is represented by a structure called
PGconn.
When opening a connection a given database name is always converted to
lower-case, unless it is surrounded by double quotes. All unspecified
parameters are replaced by environment variables or by hard coded defaults:
parameter environment variable hard coded default
--------------------------------------------------
host PGHOST localhost
port PGPORT 5432
options PGOPTIONS ""
tty PGTTY ""
dbname PGDATABASE current userid
user PGUSER current userid
password PGPASSWORD ""
Using appropriate methods you can access almost all fields of the
returned PGconn structure.
$conn = Pg::setdbLogin($pghost, $pgport, $pgoptions, $pgtty, $dbname, $login, $pwd)
Opens a new connection to the backend. The connection identifier $conn
( a pointer to the PGconn structure ) must be used in subsequent commands
for unique identification. Before using $conn you should call $conn->status
to ensure, that the connection was properly made.
Closing a connection is done by deleting the connection handle, eg
'undef $conn;'.
$conn = Pg::setdb($pghost, $pgport, $pgoptions, $pgtty, $dbname)
The method setdb should be used when username/password authentication is
not needed.
$conn = Pg::connectdb("option1=value option2=value ...")
Opens a new connection to the backend using connection information in a
string. Possible options are: host, port, options, tty, dbname, user, password.
The connection identifier $conn (a pointer to the PGconn structure)
must be used in subsequent commands for unique identification. Before using
$conn you should call $conn->status to ensure, that the connection was
properly made.
$Option_ref = Pg::conndefaults()
while(($key, $val) = each %$Option_ref) {
print "$key, $val\n";
Returns a reference to a hash containing as keys all possible options for
connectdb(). The values are the current defaults. This function differs from
his C-counterpart, which returns the complete conninfoOption structure.
$conn->reset
Resets the communication port with the backend and tries
to establish a new connection.
$ret = $conn->requestCancel
Abandon processing of the current query. Regardless of the return value of
requestCancel, the application must continue with the normal result-reading
sequence using getResult. If the current query is part of a transaction,
cancellation will abort the whole transaction.
$dbname = $conn->db
Returns the database name of the connection.
$pguser = $conn->user
Returns the Postgres user name of the connection.
$pguser = $conn->pass
Returns the Postgres password of the connection.
$pghost = $conn->host
Returns the host name of the connection.
$pgport = $conn->port
Returns the port of the connection.
$pgtty = $conn->tty
Returns the tty of the connection.
$pgoptions = $conn->options
Returns the options used in the connection.
$status = $conn->status
Returns the status of the connection. For comparing the status
you may use the following constants:
- PGRES_CONNECTION_OK
- PGRES_CONNECTION_BAD
$errorMessage = $conn->errorMessage
Returns the last error message associated with this connection.
$fd = $conn->socket
Obtain the file descriptor number for the backend connection socket.
A result of -1 indicates that no backend connection is currently open.
$pid = $conn->backendPID
Returns the process-id of the corresponding backend proceess.
$conn->trace(debug_port)
Messages passed between frontend and backend are echoed to the
debug_port file stream.
$conn->untrace
Disables tracing.
$result = $conn->exec($query)
Submits a query to the backend. The return value is a pointer to
the PGresult structure, which contains the complete query-result
returned by the backend. In case of failure, the pointer points
to an empty structure. Before using $result you should call
resultStatus to ensure, that the query was properly executed.
($table, $pid) = $conn->notifies
Checks for asynchronous notifications. This functions differs from
the C-counterpart which returns a pointer to a new allocated structure,
whereas the perl implementation returns a list. $table is the table
which has been listened to and $pid is the process id of the backend.
$ret = $conn->sendQuery($string, $query)
Submit a query to Postgres without waiting for the result(s). After
successfully calling PQsendQuery, call PQgetResult one or more times
to obtain the query results. PQsendQuery may not be called again until
getResult has returned NULL, indicating that the query is done.
$result = $conn->getResult
Wait for the next result from a prior PQsendQuery, and return it. NULL
is returned when the query is complete and there will be no more results.
getResult will block only if a query is active and the necessary response
data has not yet been read by PQconsumeInput.
$ret = $conn->isBusy
Returns TRUE if a query is busy, that is, PQgetResult would block waiting
for input. A FALSE return indicates that PQgetResult can be called with
assurance of not blocking.
$result = $conn->consumeInput
If input is available from the backend, consume it. After calling consumeInput,
the application may check isBusy and/or notifies to see if their state has changed.
$ret = $conn->getline($string, $length)
Reads a string up to $length - 1 characters from the backend.
getline returns EOF at EOF, 0 if the entire line has been read,
and 1 if the buffer is full. If a line consists of the two
characters "\." the backend has finished sending the results of
the copy command.
$ret = $conn->putline($string)
Sends a string to the backend. The application must explicitly
send the two characters "\." to indicate to the backend that
it has finished sending its data.
$ret = $conn->getlineAsync($buffer, $bufsize)
Non-blocking version of getline. It reads up to $bufsize
characters from the backend. getlineAsync returns -1 if
the end-of-copy-marker has been recognized, 0 if no data
is avilable, and >0 the number of bytes returned.
$ret = $conn->putnbytes($buffer, $nbytes)
Sends n bytes to the backend. Returns 0 if OK, EOF if not.
$ret = $conn->endcopy
This function waits until the backend has finished the copy.
It should either be issued when the last string has been sent
to the backend using putline or when the last string has
been received from the backend using getline. endcopy returns
0 on success, 1 on failure.
$result = $conn->makeEmptyPGresult($status);
Returns a newly allocated, initialized result with given status.
With these functions you can send commands to a database and
investigate the results. In Libpq the result of a command is
represented by a structure called PGresult. Using the appropriate
methods you can access almost all fields of this structure.
$result_status = $result->resultStatus
Returns the status of the result. For comparing the status you
may use one of the following constants depending upon the
command executed:
- PGRES_EMPTY_QUERY
- PGRES_COMMAND_OK
- PGRES_TUPLES_OK
- PGRES_COPY_OUT
- PGRES_COPY_IN
- PGRES_BAD_RESPONSE
- PGRES_NONFATAL_ERROR
- PGRES_FATAL_ERROR
Use the functions below to access the contents of the PGresult structure.
$ntuples = $result->ntuples
Returns the number of tuples in the query result.
$nfields = $result->nfields
Returns the number of fields in the query result.
$ret = $result->binaryTuples
Returns 1 if the tuples in the query result are bianry.
$fname = $result->fname($field_num)
Returns the field name associated with the given field number.
$fnumber = $result->fnumber($field_name)
Returns the field number associated with the given field name.
$ftype = $result->ftype($field_num)
Returns the oid of the type of the given field number.
$fsize = $result->fsize($field_num)
Returns the size in bytes of the type of the given field number.
It returns -1 if the field has a variable length.
$fmod = $result->fmod($field_num)
Returns the type-specific modification data of the field associated
with the given field index. Field indices start at 0.
$cmdStatus = $result->cmdStatus
Returns the command status of the last query command.
In case of DELETE it returns also the number of deleted tuples.
In case of INSERT it returns also the OID of the inserted
tuple followed by 1 (the number of affected tuples).
$oid = $result->oidStatus
In case the last query was an INSERT command it returns the oid of the
inserted tuple.
$oid = $result->cmdTuples
In case the last query was an INSERT or DELETE command it returns the
number of affected tuples.
$value = $result->getvalue($tup_num, $field_num)
Returns the value of the given tuple and field. This is
a null-terminated ASCII string. Binary cursors will not
work.
$length = $result->getlength($tup_num, $field_num)
Returns the length of the value for a given tuple and field.
$null_status = $result->getisnull($tup_num, $field_num)
Returns the NULL status for a given tuple and field.
$res->fetchrow
Fetches the next row from the server and returns NULL if all rows
have been processed. Columns which have NULL as value will be set to undef.
$result->print($fout, $header, $align, $standard, $html3, $expanded, $pager, $fieldSep, $tableOpt, $caption, ...)
Prints out all the tuples in an intelligent manner. This function
differs from the C-counterpart. The struct PQprintOpt has been
implemented with a list. This list is of variable length, in order
to care for the character array fieldName in PQprintOpt.
The arguments $header, $align, $standard, $html3, $expanded, $pager
are boolean flags. The arguments $fieldSep, $tableOpt, $caption
are strings. You may append additional strings, which will be
taken as replacement for the field names.
$result->displayTuples($fp, $fillAlign, $fieldSep, $printHeader, qiet)
Kept for backward compatibility. Use print.
$result->printTuples($fout, $printAttName, $terseOutput, $width)
Kept for backward compatibility. Use print.
These functions provide file-oriented access to user data.
The large object interface is modeled after the Unix file
system interface with analogies of open, close, read, write,
lseek, tell.
Starting with postgresql-6.5 it is required to use large objects
only inside a transaction ! See eg/lo_demo.pl for an example,
how to handle large objects.
$lobj_fd = $conn->lo_open($lobjId, $mode)
Opens an existing large object and returns an object id.
For the mode bits see lo_create. Returns -1 upon failure.
$ret = $conn->lo_close($lobj_fd)
Closes an existing large object. Returns 0 upon success
and -1 upon failure.
$nbytes = $conn->lo_read($lobj_fd, $buf, $len)
Reads $len bytes into $buf from large object $lobj_fd.
Returns the number of bytes read and -1 upon failure.
$nbytes = $conn->lo_write($lobj_fd, $buf, $len)
Writes $len bytes of $buf into the large object $lobj_fd.
Returns the number of bytes written and -1 upon failure.
$ret = $conn->lo_lseek($lobj_fd, $offset, $whence)
Change the current read or write location on the large object
$obj_id. Currently $whence can only be 0 (L_SET).
$lobjId = $conn->lo_creat($mode)
Creates a new large object. $mode is a bit-mask describing
different attributes of the new object. Use the following constants:
- PGRES_INV_SMGRMASK
- PGRES_INV_ARCHIVE
- PGRES_INV_WRITE
- PGRES_INV_READ
Upon failure it returns PGRES_InvalidOid.
$location = $conn->lo_tell($lobj_fd)
Returns the current read or write location on the large object
$lobj_fd.
$ret = $conn->lo_unlink($lobjId)
Deletes a large object. Returns -1 upon failure.
$lobjId = $conn->lo_import($filename)
Imports a Unix file as large object and returns
the object id of the new object.
$ret = $conn->lo_export($lobjId, $filename)
Exports a large object into a Unix file.
Returns -1 upon failure, 1 otherwise.
Edmund Mergl <E.Mergl@bawue.de>
PostgreSQL Programmer's Guide, Large Objects and libpq
|
