 |
 |
 |
Distributing Python Modules |
 |
 |
 |
5.2 Creating RPM packages
The RPM format is used by many popular Linux distributions, including
Red Hat, SuSE, and Mandrake. If one of these (or any of the other
RPM-based Linux distributions) is your usual environment, creating RPM
packages for other users of that same distribution is trivial.
Depending on the complexity of your module distribution and differences
between Linux distributions, you may also be able to create RPMs that
work on different RPM-based distributions.
The usual way to create an RPM of your module distribution is to run the
bdist_rpm command:
python setup.py bdist_rpm
or the bdist command with the --format option:
python setup.py bdist --formats=rpm
The former allows you to specify RPM-specific options; the latter allows
you to easily specify multiple formats in one run. If you need to do
both, you can explicitly specify multiple bdist_* commands
and their options:
python setup.py bdist_rpm --packager="John Doe <jdoe@example.org>" \
bdist_wininst --target_version="2.0"
Creating RPM packages is driven by a .spec file, much as using
the Distutils is driven by the setup script. To make your life easier,
the bdist_rpm command normally creates a .spec file
based on the information you supply in the setup script, on the command
line, and in any Distutils configuration files. Various options and
sections in the .spec file are derived from options in the setup
script as follows:
| RPM .spec file option or section |
Distutils setup script option |
| Name |
name |
| Summary (in preamble) |
description |
| Version |
version |
| Vendor |
author and author_email, or
&
maintainer and maintainer_email |
| Copyright |
licence |
| Url |
url |
| %description (section) |
long_description |
Additionally, there are many options in .spec files that don't have
corresponding options in the setup script. Most of these are handled
through options to the bdist_rpm command as follows:
| RPM .spec file option or section |
bdist_rpm option |
default value |
| Release |
release |
``1'' |
| Group |
group |
``Development/Libraries'' |
| Vendor |
vendor |
(see above) |
| Packager |
packager |
(none) |
| Provides |
provides |
(none) |
| Requires |
requires |
(none) |
| Conflicts |
conflicts |
(none) |
| Obsoletes |
obsoletes |
(none) |
| Distribution |
distribution_name |
(none) |
| BuildRequires |
build_requires |
(none) |
| Icon |
icon |
(none) |
Obviously, supplying even a few of these options on the command-line
would be tedious and error-prone, so it's usually best to put them in
the setup configuration file, setup.cfg--see
section 3. If you distribute or package many Python
module distributions, you might want to put options that apply to all of
them in your personal Distutils configuration file
(~/.pydistutils.cfg).
There are three steps to building a binary RPM package, all of which are
handled automatically by the Distutils:
- create a .spec file, which describes the package (analogous
to the Distutils setup script; in fact, much of the information in the
setup script winds up in the .spec file)
- create the source RPM
- create the ``binary'' RPM (which may or may not contain binary
code, depending on whether your module distribution contains Python
extensions)
Normally, RPM bundles the last two steps together; when you use the
Distutils, all three steps are typically bundled together.
If you wish, you can separate these three steps. You can use the
--spec-only option to make bdist_rpm just
create the .spec file and exit; in this case, the .spec
file will be written to the ``distribution directory''--normally
dist/, but customizable with the --dist-dir
option. (Normally, the .spec file winds up deep in the ``build
tree,'' in a temporary directory created by bdist_rpm.)
Release 2.4.5, documentation updated on 18 October 2006.
See About this document... for information on suggesting changes.
|
